The feed clock controls the feeding of the animals in the house. One feed clock can be used per house.
INSTALLER TIME CLOCKS FEED
Setting of the name of the function.
Setting indicating how the user can use the clock:
ON/OFF: User enters on/off times.
ON/DURATION: User enters time and duration of activation.
Setting of the registration input used to measure the amount of feed.
Setting for the analog output address (choice LINEAR) or relay output (choice
RELAY).
Setting of the passive (not controlled) relay status.
N.O. (normally open) if it makes no contact.
N.C. (normally closed) if it makes contact.
The water clock controls the water supply in the house. One water clock can be used per house.
INSTALLER TIME CLOCKS WATER
Setting of the name of the function.
To Next Page
Loading...
General