Need help?Do you have a question about the Fancom LUMINA 38 and is the answer not in the manual?
General| Category | Control Systems |
|---|---|
| Brand | Fancom |
| Model | LUMINA 38 |
| Application | Poultry housing climate control |
| Connectivity | Ethernet |
| Display | LCD |
| Operating Temperature | 0-50°C |
| Humidity Range | 10% to 90% RH |
Manuals available for the control computer.
Explanation of symbols and decimal point usage in the manual.
Contact information for support and questions.
Overview of central management system.
Explanation of ventilation principles and types.
Description of four types of house ventilation.
Explanation of controllable and extra fans.
Explanation of the combi-table for ventilation control.
Settings for tunnel part ventilation using T-phase combi-table.
Explanation of modulating control for ventilation.
How to set fixed cycle time for modulating control.
Setting optimal ON/OFF times for modulating control.
Explanation of MicroControl® pulsing ventilation.
Dividing the house into zones for heating.
How heaters are linked and activated.
Explanation of ON/OFF and modulating relay control for heating.
P-control and PI-control for linear heating.
Controlling cooling units with ON/OFF or modulating.
Modulating control for cooling systems.
Humidity control using ON/OFF or modulating.
Correcting temperature based on relative humidity.
Adapting HumiTemp to animal age.
Optimum setpoint control for energy saving.
System for reducing NH3 emissions.
Guidelines for choosing the installation location.
Step-by-step guide for mounting the device.
Instructions for electrical connections and safety.
Configuring the control computer: menu, process, and connections.
Configuring system settings like clock, language, and network.
Setting measurement units (Metric/Non-Metric).
Setting passwords for user access levels.
Configuring data sharing between computers.
Using SD card for data backup and program transfer.
Viewing and managing control computer applications.
Configuring communication interfaces like I²C and IO-Net.
Testing communication channels and IO functions.
Configuring house-specific parameters for system operation.
Setting internal house parameters like heating, cooling.
Setting external climate measurement parameters.
Setting combi-table parameters for ventilation.
Configuring time-based controls like feed and light.
User-specific settings and curve applications.
Setting parameters for OptiSec control.
Configuring ventilation settings, including combi-tables and inlets.
Configuring house sizes and combi-control speed.
Setting parameters for standard and tunnel air inlets.
Configuring heating, cooling, and humidification controls.
Configuring time-based controls for feed, water, and light.
Registering digital inputs for measurements.
Setting up internal climate sensors and parameters.
Configuring outside climate sensors and parameters.
Connecting and configuring external alarm contacts.
How thermo differential alarms work.
Assigning relays for thermo differential activation.
Resetting thermo differential alarms.
Understanding input/output hardware and sequence addresses.
Calibrating measurement values.
Configuring analog input settings.
Setting the type of measurement for analog inputs.
Configuring digital input settings.
Configuring analog output settings.
Configuring digital output settings.
Specifications for the power supply unit.
Specifications for the IOB.12 module.
Specifications for analog outputs.
Specifications for analog inputs.
Specifications for digital inputs.
Specifications for digital outputs.
Specs for alarm contact and communication interfaces.
Specifications for the FRM.8 module.
Specs for device housing and ambient climate.
Components of the interior control computer.
Details of the power supply unit.
Detailed specifications of the IOB.12 module.
Detailed specifications of the FRM.8 module.
Terminal resistor setup for network connections.
Declaration of conformity with directives.
To Next Page
