Step 2: Lay the bench top facedown on a flat, clean and non-abrasive surface. As shown in
the diagram below, attach the base to the bench top using the socket cap screws (F), and
fasten the aprons to the bench top using the self-tapping screws (G).
A. Allen key x 1
B. Socket
cap screws
(M6×50) x 6
C. Split
washers
(M6×8) x 6
D. Flat
washers
(M6×12) x 6
E. Cross dowel
barrel nuts
(Ø10) x 4
F. Socket cap
screws
(M6×15) x 4
G. Self-tapping
screws
(Ø4×20) x 4
Contact Us
If you encounter any problems when using this product, please feel free to contact us through
the following methods or scan the QR code to get a quick response and a satisfactory
solution.
Amazon Platform: “Contact Seller”
Official Website: https://fancyarn.afterservice.vip
Email Address: fancyarn@afterservice.vip
2/2
To Previous Page
Loading...