33
2. Instructions for using the double-sided foam sticker
a) Please choose a suitable curved surface or flat surface to make sure the double-sided foam sticker
can be fixed properly.
b) Please make sure the surface is clean and smooth before affixing the double-sided foam sticker.
c) Under low temperature (under 20°C), it is suggested to heat up the surface (maybe use a hairdryer
or something else) before sticking.
3. General Tips
a) The surface of the camcorder might get warm up after a long working time.
b) If the camcorder will not be used for a long time, it’s advised to take out battery and charge it every
six months to keep it in a good condition.
c) The use of the digital zoom may slightly reduce the image quality.
To Next Page
Loading...