2
fantech
Assembly
Tools required
Knife Philips Slot Screwdriver
Screwdriver PH-3
Parts
Basic Unit (1) Long Tube (2) Short Tube (2) Bent Handle (2) Wheel Axle (1) Wheel (2)
Screw – Handle (6) Hand Axle (1) Washer (2) Lynch Pin (2)
Unpacking
Recycle all cardboard and plastic bags. Keep plastic bags out of the reach of children.
1 Position up and open top. 2 Remove inserts and handle 3 Cut two vertical corners. 4 Remove the unit.
components. Do not damage unit
with knife.
Note Warning/
Important
note
Information Technical
information
Practical tip
To Next Page
Loading...
