What to do if Fantic XMF 1.7 CARBON RACE lighting faults?
If you are experiencing lighting faults on your Fantic Bicycle, turn off the system completely. After that, check all cables and connectors of the front and/or rear lighting system. Finally, restart the system.
What to do if brake lighting faults on Fantic XMF 1.7 CARBON RACE Bicycle?
If you encounter brake lighting faults on your Fantic Bicycle, turn off the system completely. Proceed by checking all cables and connectors of the brake system, and then restart the system.
How to fix speed sensor fault on Fantic XMF 1.7 CARBON RACE?
To address a speed sensor fault on your Fantic Bicycle, check the speed sensor and the position of the spoke magnet.
Details regional variations in specifications for different markets.
Explains the EPAC classification for electric bikes and its requirements.
Explains the meaning of various symbols used in the manual for clarity.
Information regarding legal compliance and road usage regulations for e-bikes.
Guidelines for proper operation and warnings against misuse of the bicycle.
Table indicating terrain suitability and allowed riding conditions.
Procedures for unpacking the bicycle and locating its identification plate.
Bicycle's external dimensions and a list of included standard components.
Visual guide to identify and locate all major bicycle parts.
Identifies and explains the function of controls on the handlebars.
Detailed technical specifications for the bicycle, including components and materials.
Detailed descriptions of key bicycle parts like brakes, gears, frame, wheels, and battery.
Essential setup steps and pre-ride safety checks for the bicycle.
Procedures for inspecting wheel mounting, tyre condition, and signs of wear.
How to check tyre valve position and maintain correct air pressure.
Inspecting the seat, handlebar, and their mounting for stability.
Detailed checks for the proper functioning and condition of the braking system.
Inspection of the chain, sprockets, motor, and associated electrical components.
Checking bicycle lights, accessories, and performing general component checks.
Specifications for correct tightening torque on various bicycle fasteners.
Instructions for correctly installing the bicycle pedals.
Steps for adjusting handlebar position, height, and alignment.
Procedures for adjusting saddle height, position, and inclination.
Adjusting brake and gear shift levers for optimal user comfort and control.
Basic advice for operating the bicycle and its assist modes.
How to use the bicycle's gear system for optimal performance and efficiency.
Proper use of the bicycle's braking system for safe and effective stopping.
Guidelines for safe riding, post-fall procedures, and bicycle transport.
Adjusting front fork compression, return, and rear shock absorber settings.
Guidance on setting suspension sag for optimal rider and terrain adaptation.
Information on factors affecting the e-bike battery's operational duration and range.
Overview of the power assisted pedalling system's functions and initial setup.
Procedures for removing, charging, assembling, and caring for the battery pack.
General information about the display unit and associated safety advice.
Instructions for installing the display and using its basic control buttons.
How to operate the display, view system info, lights, battery level, and assistance modes.
Navigating menus, viewing trip data, and configuring system settings like language and display options.
Guidance on diagnosing and resolving common bicycle issues using manual information.
Information on system errors, their meanings, and initial diagnostic steps.
A comprehensive list of error codes, their explanations, and recommended troubleshooting solutions.
To Next Page
General
