- 19 -
Problem Solution
Make sure the air hose is securely connected.
The lithium battery's voltage level significantly drops when
discharging power, causing the battery level indicator to have a
different display when inflating compared to standby state. This is
normal.
Use a certified adapter and the included charging cable, and try
charging again.
1. Make sure the remaining battery level is sufficient.
2. The discharging output is 5V/2A. Make sure this output meets
the requirements of the charged device.
3. The inflator can not charge other devices while inflating.
Air leakage after connecting
the air tube
The battery level indicator is
different when inflating
compared to standby state
The battery level indicator
doesn’t show on the screen
after charging
The inflator cannot charge
other devices.
Simultaneously press the light button and mode button to restart
the inflator.
None of above. The inflator
doesn’t react with any input
To Next Page
Loading...