To Next PageTo Next Page
Need help?Do you have a question about the Far Tools SKC 800 and is the answer not in the manual?
General| Brand | Far Tools |
|---|---|
| Model | SKC 800 |
| Category | Rotary Hammer |
| Language | English |
Main power control for the machine operation.
Mode selection for drilling, impact, and chipping.
Adjustable limit for setting drilling depth.
Ergonomic auxiliary handle for user stability.
Tool holder system for SDS bits.
Attaching the auxiliary side handle to the tool.
Installing the depth adjustment guide.
Attaching the dust collection bag.
How to start the machine and set the operating speed.
Operating drilling, impact, and chipping modes.
Utilizing the depth setting feature for accuracy.
Properly using the auxiliary handle for control.
Various drilling bits, chisels, and chuck accessories.
Replacement carbon brushes for motor maintenance.
Electrical input requirements (230V ~ 50 Hz).
Machine's power consumption (800 W).
Maximum rotation speed without load (850 min-1).
Maximum impact rate (4500 Hit.min-1).
Importance of reading the manual for safe operation.
Understanding general danger and warning symbols.
Conformity with European standards.
Specification of the machine's weight (3.4 kg).
Using safety glasses during operation.
Using a mask against dust particles.
Using hearing protective equipment.
Wearing protective gloves for safety.
Instructions against discarding in general waste.
Guidance on product and packaging recycling.
SKC 800 model and serial number details.
Voltage, frequency, power, and speed ratings.
CE and other product certifications.
Person authorized to compile technical documentation.
Statement of conformity with CE directives and standards.
List of applied CE directives and standards.
Warranty against construction and material defects.
Conditions under which warranty is void.
