12
CLEANING
t Clean all parts of the appliance after each use.
t Clean the temperature control probe (2) and nonstick cooking surface (8) with a
slightly damp, soft cloth.
WARNING:
- Any food residue left on the nonstick cooking surface (8) could cause odor
and/or smoke emissions.
NOTE: Dry all parts and surfaces thoroughly before use. Make sure that all parts and
surfaces are completely dry before connecting the appliance to a wall outlet.
Storage
t Before storage, always make sure the appliance is completely cool, clean and dry.
t It is recommended to store the appliance in a dry place.
t Store the appliance on a stable shelf or in a cupboard. To avoid accidents, ensure
that both the appliance and its power cord are beyond reach of children or pets.
TROUBLESHOOTING
Problem Cause Solution
The appliance is
not working
Temperature control probe
not correctly installed
Attach temperature control
probe correctly
Appliance not plugged in Insert the temperature control
probe into the electrical outlet,
and the plug into the wall outlet
Wall outlet not energized Check fuses and circuit breaker
Temperature control knob
set to the OFF position
Set the temperature control
knob to the required
temperature according to the
food to be cooked
Temperature control probe
damaged
Disconnect the appliance from
the wall outlet and contact
qualied personnel to check
and repair the temperature
control probe
Griddle__IM_US_V4_.indd 12 10:38 AM
To Next Page
Loading...
Need help?
General