17
10. MEMORY FUNCTION
(1) Press "Memory" to choose up to 3 cooking programs. 1, 2, or 3 will display.
(2) If the program has been set, press "START/+30SEC" to use it. If not, continue to set the
program. A maximum of two microwave stages can be set for each procedure.
(3) After finishing the setting, press "Memory" to save the procedure and turn back to the standby
modes. Press "START/+30SEC" to save and operate the setting.
EXAMPLE: To set the following program as the second memory, that is memory 2, and cook the
food with 80% microwave power for 3 minutes and 20 seconds. Follow these steps:
A. In standby mode, press "Memory" twice, "2" displays.
B. Press "Cook Time", then input number pads "3", "2", "0" to choose the cooking time.
C. Press "Power Level" once, then press number button "8", "PL8" displays.
D. Press "Memory" to save the current setting. The oven beeps once then turns back to
standby mode. If "START/+30SEC" is pressed, the cooking program can be saved as
memory 2 and operated.
E. If the electricity is not cut off, the program will be saved permanently. If it is, the
program will need to be reset.
F. To run the saved program, in standby mode, press "Memory" twice, "2" displays and press
"START/+30SEC" to run the saved cooking program.
NOTE: Auto cook and defrosting cannot be set in memory function.
At most, 2 stages can be set for cooking. In multi-stage cooking, if one stage is defrosting, then
defrosting shall be placed at the first stage automatically.
NOTE: Auto menu cannot be used in multi-stage cooking.
Example: if you want to cook with 80% microwave power for 5 minutes + 60% microwave power
for 10 minutes. The cooking steps are as follows:
(1) Press "Cook Time" once, then press "5", "0", "0" to set 5 minutes.
(2) Press "Power Level" once, then press
(3)
number button "8" to set 80% microwave power.
(4)
Press "Cook Time" once, then press "1", "0", "0", "0" to set 10 minutes.
(5)
Press "Power Level" once,
then press number button "6" to set 60% microwave power.
Press "START/+30SEC" to start cooking.
(1) In the microwave cooking mode, press "Clock" and the current time of day will be displayed
for three seconds then return to the previous mode.
(2) In the microwave cooking mode, press "Power Level" and the current microwave power will be
displayed for 3 seconds then return to the previous mode.
11. MULTI-STAGE COOKING
12. INQUIRING FUNCTION
To Next Page
Loading...
