To Next PageTo Next PageWhat to do if the tractor slides backwards when winching with Farmi Forest Corporation 351P?
If your Farmi Forest Corporation Winches' tractor slides backwards when winching, it may be because the parking brakes are not engaged, or the dozer blade isn't properly anchoring the unit. To resolve this, ensure the parking brakes are locked and lower the winch completely to the ground to secure it.
Why does the cable develop kinks on Farmi Forest Corporation 351P?
If your Farmi Forest Corporation Winches cable develops kinks, it might be due to a cable brake that is too loose. You can fix this by tightening the drum brake and tightening the cable on the drum by pulling out the cable and by winching with a heavy load.
Why is there insufficient pull on the cable of Farmi Forest Corporation 351P?
If you're experiencing insufficient pull on the cable of your Farmi Forest Corporation Winches, it could be due to normal wear of the clutch, oil or grease contamination, or the clutch being too loosely adjusted. You should disassemble and clean the parts if there is oil or grease.
General| Tractive power Cable drum empty ( Maximum) Cable drum full (Minimum) | 35 kN 13 kN |
|---|---|
| Cable capacity Ultimate strength of the cable 1,96 kN/mm2 | recommendation 60 m of ø 10 mm cable |
| Winching speed 540 rpm | 0, 5 - 1, 3 m/s |
| Clutch | Mechanical friction plate clutch with heat sink |
| Mounting | To 3-point hitch(Kat.I) |
| Power transmission | Universal shaft from tractor |
| Power needed | min. 10 kW (14 hp) |
Weight and Dimensions| Weight( without cable) | 170 kg |
|---|
