EasyManua.ls Logo

FARMTECH FDD 3000 - Page 15

Default Icon
105 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.
Never stand among the tractor and machine when adjusting the levers of the 3-point
suspension system. The system controlling the hydraulic suspension levers must be
necessarily locked when travelling on the road open to traffic and the machine is
suspended.
7.
Agricultural equipment and machines must not be coupled to tractor in operating
state by driver; an assistant must be kept available for this purpose to the extent
permitted by possibilities. If there is no assistant, tractor must be stopped, parking brake
must be pulled during the mounting of the connecting pins.
8.
Agricultural machines may throw stones. Due to this hazard, tractor and equipment
must not be approached unless completely stopped.
9.
Before starting to work, learn the machine components, moving parts and their
functions from our authorized service to provide the first start-up service.
10.
Overall inspection of agricultural machines and equipment must be done especially
in terms of safety instructions when returning from work or before starting to work. If
there is folding and/or travel position option, necessary procedures must be followed.
11.
Overall traffic rules must be observed on the roads open to traffic. Maximum
permitted width for the agricultural machine that you will carry behind your tractor is 3.00
m for highways. If the equipment you are using is wider and there is no option of folding
to bring in travel position, do not use the machine on the roads open to traffic. Transport
the machine in accordance with the overall traffic rules.
12.
Use connectors suitable for tractor and equipment during the engagement of
equipment. For the equipment used with 3-point suspension, tractor and equipment
engagement categories must be necessarily same, and they must be engaged by
placing an adapter component between them if the categories are different.
13.
Note that there is jamming hazard during the engagement of machine to tractor via
three-point suspension setup. Before engaging or disengaging equipment to/from tractor
via 3-point suspension system, bring hydraulic control arm to appropriate position.
Hydraulic arms may rise and fall accidently.
14.
Do not stand and do not allow anyone to stand among tractor and machine when
tractor is not stopped, parking brake is not pulled and wheel chock is not placed.
15.
If you have to leave tractor during transport and operation, never leave it in
operating state.
16.
Do not allow persons without license, children, persons not trained and persons
whose health condition is not appropriate to use tractor and equipment.
17.
Before engaging machine to tractor, attach the amount of weight needed by
equipment in appropriate positions.

Related product manuals