Depth Adjustment Lift Hydraulic
Jacks
Speed Control Valve
Marker Hydraulic
Jacks
7 Pin 12V Electrical
Connection
The structures of the jacks are designed to be different
to prevent the confusion of the marker jacks and the
depth adjustment lift jacks when connecting the
hydraulic jacks and the tractor.
The hydraulic jacks of the depth adjustment lift of
standard construction with no additional equipment. The
market jacks have “speed control valves” mounted on
the jack (in rectangular prism form).
The lifting/lowering speeds of the markers can be
changed by using the set screw and hexagonal wrench
over the speed control valves. Thus, optimum marker
operating speed can be achieved regardless of the
hydraulic flow rate of the tractor where equipment is
used.
B.3 Electrical Connection
Your grain drill has 12V 7 pin tractor connection. With
this connection following signalizations can be used as
integrated with the tractor’s signalization system;
-
Hazard flasher,
-
Signals
-
Parking light
-
Brake warning light
To Next Page
Loading...