Do you have a question about the Fass HK-1001 and is the answer not in the manual?
| Heating Power | 2000W |
|---|---|
| Number of power levels | 3 |
| Thermostat | Yes |
| Overheat protection | Yes |
| Type | Convection Heater |
Install the heater element into the FASS HD Series system.
Alternative locations for mounting the heater on the HD Series.
Connect the heater wiring harness to the vehicle's electrical system.
Perform final checks on fittings and electrical connections.
Instructions for simultaneously installing two heater elements.
Install the heater element into the FASS Titanium/Platinum Series.
Alternative mounting points for the Titanium Series heater.
Connect the heater wiring harness for Titanium/Platinum Series.
Conduct final checks for Titanium/Platinum Series installation.
Install a second heater element for Titanium Series.