rockcoco
assembly manual
STEP 3
Determine the point of suspension for your Rockcoco inside
your home.
Note! Due to the Rockcoco’s weight (7 kg), it is required
always to mount the Fatboy Ceiling kit onto a concrete or
solid ceiling construction.
Caution! Don’t suspend the RockCoco directly on a junction
box. Make sure the fixation point meets these requirements!
Mount the lamp with at least 2 pers0ns.
Please use the following method of determining the point of suspension.
STEP 4
Strip (if necessary) and connect the cables, extruding from
the junction box, to the strip terminal-block.
STEP 5
Drill the holes in your ceiling as followes:
Wooden joists:
Rough-drill with a wood drill bit (ø 6 mm) the 4 holes.
Put the dowels (ø 6 mm) into the holes.
Concrete ceiling:
Drill with a concrete drill bit (ø 6 mm) the 4 holes.
Put the dowels (ø 6 mm) into the holes.
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 11 15/12/14 10:35
To Next Page
Loading...
