rockcoco
assembly manual
STEP 1
Be sure your grid provides the required voltage, frequency
and grounding: 230 - 240 VAC / 50 - 60 Hz / Earthed sign.
Caution! Do not install the RockCoco in case of any doubts.
Please contact the sales outlet or an electrician.
STEP 2
Warning! To avoid any chance of an electric shock, switch
off the current in the meter cupboard.
STEP 3
For outdoor use, please use the large cable instead of the
short one. Click and screw the cable in the transformer and
use steel cable to hang the lamp in a tree or wherever you
like. Make sure the desired spot is stable and strong enough
to hold the lamp. The cap isn’t necessary for the suspension.
RockCocoManual-DeletingDull-NEW-230x170-singlepage.indd 16 15/12/14 10:35
To Next Page
Loading...
