Need help?Do you have a question about the Faudi AFGUARD AFG Series and is the answer not in the manual?
General| Series | AFGUARD AFG |
|---|---|
| Material | Aluminum |
| Connection Type | Threaded |
| Operating Pressure | 10 bar |
| Type | Filter |
| Application | Fuel Filtration |
Defines the intended application and purpose of the AFGUARD® sensor for measuring free water in Jet Fuel.
Outlines the procedures and personnel qualifications required for installing, commissioning, and operating the device.
Covers general safety conditions and compliance with regulations for operating the sensor.
Details the process for returning the device for repair, including necessary documentation.
Explains the physical components and labeling of the AFGUARD® sensor.
Lists all items included in the standard package of the AFGUARD® sensor.
Guides on receiving, inspecting, and storing the AFGUARD® upon delivery.
Specifies environmental and physical requirements for installing the sensor.
Provides detailed physical dimensions of the AFGUARD® sensor for installation planning.
Details the correct horizontal mounting orientation required for the AFGUARD® sensor.
Covers the special threads required for AFGUARD® installation and selecting the optimal location.
Advises on selecting an accessible and secure location for sensor installation and maintenance.
Step-by-step instructions for correctly installing the AFGUARD® sensor into the pipe section.
Explains how to orient the sensor within the pipe for optimal droplet detection.
Details the components of a complete AFGUARD® measuring system, including accessories.
Specifies requirements for isolating converters used with the AFGUARD® for intrinsic safety.
Provides guidance on ensuring intrinsic safety for interconnections in electrical circuits.
Offers recommendations for installing the AFGUARD® sensor carefully to avoid damage.
Illustrates typical installation scenarios for the AFGUARD® sensor.
Describes measuring free water content at filter vessel inlets and outlets.
Lists checks to ensure the AFGUARD® sensor is correctly installed and leak-free.
Provides instructions on how to safely remove the AFGUARD® sensor from the pipe.
Details how to connect the AFGUARD® to an isolated converter with power supply.
Explains the assembly of the AFGUARD® sensor, its components, and functional units.
Describes how the AFGUARD® sensor works to detect free water and other phases.
Explains the 4-20 mA signal output and its interpretation for different conditions.
Provides guidance on calibrating the AFGUARD® sensor for accurate measurements.
Outlines the steps to verify the correct installation and functionality of the AFGUARD®.
Describes a special device and procedure for testing the AFGUARD® loop functionality.
Provides instructions on how to clean the AFGUARD® sensor's optical path.
Lists standard and optional accessories for connecting the AFGUARD®.
Details optional accessories required for installation, such as torque wrenches.
Refers to the issues and solutions section for resolving problems.
Cautions that only authorized personnel should perform sensor checks.
Lists available spare parts for the AFGUARD® sensor.
Instructions for returning the AFGUARD® for repair, including necessary documentation.
Guidance on the environmentally compliant disposal of the AFGUARD® electronic components.
Details the measured values and ranges for the AFGUARD® sensor.
Specifies operating and storage temperature, humidity, and ingress protection.
Lists electrical supply, optical radiation, and explosion group data.
Defines operating pressure, process temperature, and media compatibility.
Describes the physical design, dimensions, and materials used in the AFGUARD®.
Official EC-Type Examination Certificate detailing ATEX compliance.
English translation of the EC-Type Examination Certificate.
Approval certificate from India's PESO for hazardous area use.
Formal declaration of the product's conformity with EC directives.
To Next Page