Fbt DLM26 - Page 10

4. Output[x] [Name] Vu-Meter
Vu-Meter = Level
-> Vu-Meter = Level Param.1 N/A Level Same as PAR2
Limiter Act.
RMS Cmp Act.
5. Output[x] [Name] Name
Name = [Name]
-> Name = _ (For Editing the Device's Name, refer to the Details on the“Utility Menus Use” Section)
6. Output[x] [Name] Source
Source = InA
-> Source = InA Param.1 N/A. InA (Channel A) Same as PAR2
InB (Channel B)
InA+InB (Channel A+ Channel B)
7. Output[x] [Name] Gain
Gain = + 0.0 dB
-> Gain = + 0.0 dB Param.1 N/A -12 db Same as PAR2
:
+6 dB
8. Output[x] [Name] RMS Cmp
Thr: +12.0dBu Rto: 1:1
-> Thr: +12.0dBu Rto: 1:1 Param.1 N/A [Threshold] +20.0dBu [Ratio] 1:1
: :
-10.0dBu 32:1
9. Output[x] [Name] RMS Cmp
A: 5ms R: 0.2s Kn= 2%
-> A: 5ms R: 0.2s Kn= 2% [Atk time] 10ms [Rel time] 0.1s [Knee.] Hard (00%)
: : :
4s 3.0s Soft (100%)
10. Output[x] [Name] Limiter
A: 5ms R: 0.2s +20dB
-> A: 5ms R: 0.2s +20dB [Atk time] 2ms [Rel time] 20ms [Amp.] -10.0 dB
: : :
50ms 200ms
+20.0dB (OFF)
11. Output[x] [Name] Delay
Delay = 0.000 ms
-> Delay = 0.000 ms Param.1 N/A 000.0000mS 000.0000mS
[1 ms steps] [20.8 us steps]
848.0000mS 000.9984mS
12. Output[x] [Name] Polarity
Polarity = Normal
-> Polarity = Normal Param.1 N/A Normal Same as PAR2
Invert
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC