Main
1: Opens System Config Menu (PW-L4 required)
2: Opens Walk Test / Drill Menu (PW-L1 required)
3: Opens I/O Control Menu (PW-L2 required)
4: Opens Set Clock Menu (PW-L1 required)
5: Opens System Config Menu for viewing only (PW-L3
required)
6: Opens Event Log Menu (PW-L1 required)
Note: View option is identical to the Config option, allowing
access to all the configuration menus, but prevents changing
of any settings. The limiting factor between View and Config
is the password level used.
1: Opens Autoconfig Menu
2: Opens Global Config Settings Menu
3: Opens Select Input Device Menu
4: Opens Select Output Device Menu
5: Opens Select Group Menu
6: Opens Change Password Menu
1: Clears system configuration, then reads SLCs.
2: Reads SLC, finds changes. New devices get default
config, missing devices are marked off-line. No change to
globals or groups. (via confirm screen)
1: Opens Device Defaults menu
2: Opens NAC Settings menu
3: Opens Coded Pattern Setup menu
4: Opens System ID menu
5: Opens Dialer Settings menu
6, 7: Opens Misc. Globals menus
MenuTree Display and Selections
7100 Series Menu System
[SYSTEM] 1:Auto 2:Global 3:Inputs
[CONFIG] 4:Outputs 5:Groups 6:Passwords
[AUTO- ] 1:Clear, then... 2:Update SLCs
[CONFIG]
[GLOBAL] 1:I/O Devices 2:NACs 3:Codes
[CONFIG] 4:SystemID 5:Dialer 6:Misc.
[MAIN] 1:Config 2:Walk/Drill 3:I/O
4:Clock 5:View 6:Log 7:Info
Main
Config
Main
Config
Auto
Main
Config
Global
NOTES:
1. In general, “BACK” exits the current menu and returns it to the previous menu without changing any
settings. “OK” accepts any changes that have been made and returns to the previous menu, except in
special cases where it continues to the next menu in a group. (See Menu 35).
2. The Set/View Configuration functions use the same menus, but behave differently depending on the main
menu selection and password given. If the “Config” option is selected and a valid Level 4 password is entered,
the menus are fully operational. If the “Views” option is selected, or if the password is not valid for Level 4, then
the menus may be examined but no changes can be made.
28 of 43 9000-0447
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...