NIGHT END
NIGHT START
HOLIDAYS
WEEKEND DAYS
NIGHT HOURS
DATE
TIME
CLOCK
5.5 CLOCK Menu Selection
Time is set in 24 hour notation. It is set with hours then minutes “HHMM”.
Date is set as month, date and year “MMDDYY”.
Night Hours sets the Day/Night programming. If no time is set here the system will always remain in
the Day mode.
Night Start will initiate the Night/Weekend programming which is generally used to make certain sensors
more sensitive to particles of combustion than during the day. This must be programmed in 24 hour notation
(HHMM).
Night End will conclude the Night/Weekend programming. Weekend Days is where the user programs
the days of the week that the premises are unoccupied (the same as Night).
Holidays is where the the user programs the days of the year that the premises are unoccupied (the same
as Night and Weekends). This must be programmed as month and date (MMDD).
36 of 43 9000-0447
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...