NOTE:
Level 1 access is required to enter the “Set Clock” menu. The “Set Time” and “Set Date” functions are
available at Level 1 access, and it is also possible to view the other clock menu settings (day/night schedule,
weekends, holidays) with Level 1 access. However, Level 3 access must be obtained before these configuration
settings can be changed.
Main
Clock
Time
1: Opens Set Time menu.
2: Opens Set Date menu.
3: Opens Set Night Hours menu.
4: Opens Set Weekend Days menu.
5: Opens Set Holiday Schedule menu.
keypad: enter time.
keypad: enter date.
keypad: enter night start and end hours.
1: Toggles weekend mode YES/NO for day shown.
<>: scrolls through days of the week.
If YES, system will operate in Night mode during the entire day.
If NO, system will operate in Night mode during night hours only.
keypad: enters date to be treated as a holiday.
<>: scrolls through list of holiday entries (accepting current one).
[SET ] 13:44 (1:44 PM)
[TIME] Type HHMM (24-hour notation)
[SET ] 1:Time 2:Date 3:Night
[CLOCK] 4:Weekend 5:Holidays
[SET ] 07/16/98 (Thu July 16, 1998)
[DATE] Type MMDDYY
[SET ] Saturday (YES)
[WKEND] select day 1:Yes/No
[SET ] 12/25 Type MMDD 0000=delete
[HOLIDY] another holiday
[SET ] Start 17 End 07 (5:00P7:00A)
[NIGHT] Type SSEE (24-hour notation)
Main
Clock
Date
Main
Clock
Night Hours
Main
Clock
Holidays
Main
Clock
Main
Clock
Weekend Days
9000-0447 37 of 43
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...