3.3 Module Connections
See Tables 2 and 3 for input/output wiring connections for the approved modules.
Terminal /Wire Function
CPD-ID Smoke Detector Base
7 (+) Connects to signaling line circuit, positive (IN/OUT)
4 ( - ) Connects to signaling line circuit, negative (IN/OUT)
301ID Smoke Detector Base
3 (+) Connects to signaling line circuit, positive (IN/OUT)
5 ( - ) Connects to signaling line circuit, negative (IN/OUT)
2W-ID Smoke Detector Base
7 (+) Connects to signaling line circuit, positive (IN/OUT)
4 ( - ) Connects to signaling line circuit, negative (IN/OUT)
RIM-U Remote Identification Module- Universal
Red wire (+) Connects to Signaling line circuit positive, (IN)
Red wire (+) Connects to Signaling line circuit positive (OUT)
Black wire ( - ) Connects to Signaling line circuit, (IN)
Black wire ( - ) Connects to Signaling line circuit, (OUT)
SLM Sub-Loop Module
TB1-1 (+) Connects to signaling line circuit positive (IN)
TB1-2 ( - ) Connects to signaling line circuit negative (IN)
TB1-3 (+) Connects to signaling line circuit positive (OUT)
TB1-4 ( - ) Connects to signaling line circuit negative (OUT)
CPM Control Point Module
TB1-1 ( - ) Connects to signaling line circuit negative (OUT)
TB1-2 (+) Connects to signaling line circuit positive (OUT)
TB1-3 ( - ) Connects to signaling line circuit negative (IN)
TB1-4 (+) Connects to signaling line circuit positive (IN)
Table 2 Module Connections
9000-0437 10 of 12
To Next Page
Loading...
