★ Activate the blood pressure monitor which with UART port and start testing
according to the normal blood pressure monitor operation method.
★ After testing the result including systolic pressure , diastolic pressure and pulse will
display on LCD , press the SEND button to send these data to the receiving device
such as mobile phone .
The Blue Tooth function model is FT-C11B-BT.
Operation Method:
★ Install the APK accordance with the communication protocol into the blue tooth
signal receiving device such as mobile phone.
★ Activate the receiving device and let it be in stand- by status for blood pressure
measuring.
★Activate the blood pressure monitor which with blue tooth function and start testing
according to the normal blood pressure monitor operation method.
★ After testing the result displayed on LCD including systolic pressure ,diastolic
pressure and pulse will be automatically sent to the blue tooth receiving device
such as mobile phone .
The additional function of this model blood pressure monitor is that transmit the test
result to the APK in the receiving device via blue tooth technology.
The above two models have all function as old ones have but they have different “result
output “method.
V. Troubleshooting
Abnormality Reason Checkout
LCD shows Low Battery
icon
Batteries are low. Change new batteries.
Shows abnormal result
Cuff is not tightened
properly or its position is
incorrect.
Tighten cuff correctly and refer to
“Arm Cuff Connecting”.
The arm is moved during
measuring.
Stay calm, arm remains steady. Do
not move during measuring.
Irregular heartbeat
You can test again for light
irregular heartbeat patients. It is
inappropriate for serious irregular
heartbeat patients to use this
To Next Page
Loading...