Need help?Do you have a question about the Federal Signal Corporation Pathfinder PF200 and is the answer not in the manual?
General| Brand | Federal Signal Corporation |
|---|---|
| Model | Pathfinder PF200 |
| Category | Control Systems |
| Language | English |
Essential safety warnings and precautions for installers of siren and light systems.
Critical safety guidelines for operators using siren and light systems.
Comprehensive overview of the Pathfinder siren system's functions and capabilities.
Details on siren tones, public address, and speaker compatibility.
Information on compatible light bars and control options.
Capabilities for integrating with vehicle systems via CAN bus.
Details on the number and type of solid-state relays available.
Information on general purpose and dedicated input circuits.
Explanation of control head LEDs and diagnostic indicators.
Technical specifications for the Pathfinder system including voltage and dimensions.
Detailed specifications related to the siren's performance, frequency, and compliance.
Technical specifications for the system's relays, including current ratings.
List of components included in the PF100 and PF200 kits.
Important precautions and guidelines before wiring the system.
General steps for connecting system components to the module.
Information on serial ports for network communication.
Details on the solid-state relay outputs and their capabilities.
Description of available general purpose inputs and their configuration.
Functionality and configuration of the park input circuit.
Instructions for wiring the horn ring transfer circuit.
Guidelines for connecting speakers to the Pathfinder unit.
How speaker faults are detected and indicated.
How to amplify and rebroadcast two-way radio messages.
How to interface with vehicle OBDII or CAN bus.
Configuration and functionality of the ignition input.
Instructions for connecting the system to the vehicle battery.
Step-by-step instructions for mounting the siren unit.
Instructions for mounting the remote control head.
Procedures for testing the installed system before final configuration.
Default functions assigned to slide switches.
Default functions assigned to control head buttons.
Default functions assigned to system inputs.
How the horn ring functions control siren tones and lights.
Operation of the dimming function button.
Instructions for applying legends to the control head buttons.
How to distribute safety cards to operators.
Instructions for applying siren safety labels to the vehicle.
Step-by-step guide for replacing the slide switch.
List of available service parts and their part numbers.
Contact information and procedures for technical support and repairs.
To Next Page
