EasyManua.ls Logo

Federal Signal Corporation Unitrol 480 Series User Manual

Federal Signal Corporation Unitrol 480 Series
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MAN-80K
REV. 14 FEB 03
80K AMPLIFIER
Sirens
Sirens with P.A.
Sirens with P.A. and Switching
INSTALLATION & OPERATION
FS UNITROL * 1108 RAYMOND WAY * ANAHEIM, CA 92801 * (714)871-3336 * Fax (714)871-3418
WWW.UNITROL.COM
Question and Answer IconNeed help?

Do you have a question about the Federal Signal Corporation Unitrol 480 Series and is the answer not in the manual?

Federal Signal Corporation Unitrol 480 Series Specifications

General IconGeneral
BrandFederal Signal Corporation
ModelUnitrol 480 Series
CategoryMotorcycle Accessories
LanguageEnglish

Summary

Basic System (Model 80K)

Blow-Out Proof Transistor Protection

Details on automatic circuitry protecting output transistors from failures like short-circuited speakers.

Kawasaki Siren (Model 80KM)

Basic Siren System (Model 180K)

Wiring & Control Connections

Covers toggle switch installation, horn button/foot switch, siren speaker, and warning light connections.

Controller (Model 183K)

Siren/PA System (Models 280K & 480K)

Siren & Warning Light Control

Describes how toggle and lever positions control siren functions and warning lights, including horn ring operation.

Installation & Wiring (Models 280K & 480K)

12-Pin Connector Wiring

Details mandatory pigtail wire connections for ignition, horn ring, speakers, and ground.

Two-Tone Systems (Model 180K)

Two-Tone Systems (Models 280K & 480K)

Preliminary & Final Connections

Instructions for connecting air horn, intrusion alarm, siren speakers, and primary power for two-tone systems.

General Information

Amplifier Specifications

Lists technical specifications for amplifiers, including current drain, output power, frequencies, and protection features.

Safety Message to Operators

General Warnings & Qualifications

Emphasizes reading instructions, understanding vehicle operation, and possessing safety equipment knowledge.

Signaling & Sound Limitations

Discusses limitations of signaling devices, potential for sound damage, and impact of obstructions on output.

Driving & Control Precautions

Advises on secure attachment of systems, operating controls only when stopped, and avoiding distractions.

Safety Message to Installers

Installation Qualifications & Warnings

Highlights installer qualifications, sound hazard awareness, and crucial pre-installation steps like checking for shorts.

Installation Best Practices

Covers speaker placement, wiring routing, avoiding air bag paths, and safe drilling practices.

Related product manuals