Chapter Three: FSMS Shipping Labels
156 FedEx Ship Manager
®
Server User Guide, Version 7.6
Submitting Custom Labels for FedEx Approval
Before you can produce custom labels in a production environment, FedEx must first test these labels to
ensure that FedEx can scan them for routing and delivery. The following process is provided for label
approval:
FedEx Express Label Approval
Submit custom FedEx Express labels to:
FedEx World Headquarters
Attention: Bar Code/Label Analyst
3630 Hacks Cross Road, Building C
Memphis, TN 38125
You must submit one label sample for each FedEx service (Priority Overnight, International Priority, etc.).
After your labels have been approved, your FedEx Customer Support Representative will contact you so
that you can proceed with custom label deployment.
FedEx Ground/FHD Label Approval
Submit custom FedEx Ground/FHD labels to:
FedEx Ground
Attention: Bar Code Analyst
1000 FedEx Drive
Moon Township, PA 15108
You must submit five label samples for each FedEx Ground and/or FedEx Home Delivery service type
you want to use. Additionally, ten consecutive incremented labels are required from each production
printer you want to use. After your labels are approved, your FedEx Customer Support Representative
will contact you so that you can proceed with custom label deployment.
Doc-Tabs
If you use the 4x6 label format supported by FSMS, you may choose label stock that includes a document
tab (Doc-Tab) to print additional shipment information on a removable sticky tab. You can configure this
shipment information from your shipping data or you may choose to print configurable data that is specific
to your shipping needs. Doc-Tabs are set up in the FSMS Configuration Utility in the Doc-Tab window
(see “Doc-Tab Settings” in Chapter One: Setting Up FSMS for instructions). From this window, you may
choose to set up Doc-Tab information for FedEx Express, FedEx International, and FedEx Ground/FHD
labels.
To Next Page
Loading...