FedEx Ship Manager - Chapter Five: Using FSMS Utilities; Overview; Demand Download Utility

Chapter Four: FSMS Revenue Management
FedEx Ship Manager
®
Server User Guide, Version 7.6 161
Standard FedEx International MPS shipments – Shipment Level Dimensions
• Single Transaction MPS – Provide a single occurrence of dimension fields 57, 58, and 59 and field
1686 with a value of S.
NOTE:
When providing shipment level dimensions in the above scenario, the use of Total Weight
and Total Packages is also required (i.e. provide the Total Shipment Weight in field 1670 and
not individual package weights and provide the Total Package Count in field 116).
• Open Shipping – In the Create transaction, provide a single occurrence of dimension fields 57, 58,
and 59 and field 1686 with a value of S.
Standard FedEx International MPS shipments – Package Level Dimensions
• Single Transaction MPS – Provide an occurrence of fields 57, 58, and 59 for each occurrence of
field 1670 (Package Weight).
• Open Shipping – In the Create and Add transactions, provide a single occurrence of dimension
fields 57, 58, and 59 and field 1686 with a value of P.
IPD/IDF/IED and TD – Package Level Dimensions
• Open Shipping – In the Create and Add transactions, provide a single occurrence of dimension
fields 57, 58, and 59 and field 1686 with a value of P.
This feature is valid for the following services:
• International Priority (IP)
• International Economy (IE)
• International First (IF)
• International Priority Freight (IPF)
• International Economy Freight (IEF)
• International Priority Distribution (IPD)
• International Distribution Freight (IDF)
• Transborder Distribution Canada (TD CA)
• Transborder Distribution Mexico (TD MX)
Note: Thermal ONLY for Master Label
• International Economy Distribution (IED)
• Early Bird (FedEx Europe First)
Dim Weight Calculations for Non-Rated Countries
The Dim Weight Calculations feature allows non-rated countries to receive the dimensional weight of their
shipments. The Dim Weight Calculation feature does not provide the dim weighted charges. If dimensions
are entered on multiple pieces in the shipment, then the dimensions for each piece are calculated by
adding all of the length dimensions together, width dimensions together, and height dimensions together.
This calculation results in a total length dimension, total width dimension, and total height dimension
which will be used for a Total dimensional weight to be returned in the 120 Reply transaction in field 1086.