iii
Compliance with the EMC Directive
This equipment has been designed to comply with the essential requirements of the
Directive. However, because of the intrinsic teaching function it cannot be
electromagnetically shielded to the same extent as equipment designed for industrial or
domestic use. For this reason the equipment should only be operated in a teaching
laboratory environment where electromagnetic emissions in the immediate area might not
be expected to cause adverse effects. In the same way users should be aware that
operating the equipment near to an electromagnetic source may cause the experimental
results to be outside the range expected.
The Waste Electrical and Electronic Equipment Directive (WEEE)
If this equipment is disposed of it must be in accordance with the regulations regarding
the safe disposal of electronic and electrical items and not placed with ordinary domestic
or industrial waste.
Product Improvements
We maintain a policy of continuous product improvement by incorporating the latest
developments and components into our equipment, even up to the time of dispatch.
All major changes are incorporated into up-dated editions of our manuals and this manual
was believed to be correct at the time of printing. However, some product changes which
do not affect the teaching capability of the equipment, may not be included until it is
necessary to incorporate other significant changes.
Component Replacement
In order to maintain compliance with the Directives all replacement components must be
identical to those originally supplied.
Operating Conditions
This equipment is designed to operate under the following conditions:
Operating Temperature 10°C to 40°C (50°F to 104°F)
Humidity 10% to 90% (non-condensing)
WARNING:
This equipment must not be used in conditions of condensing humidity.
To Next Page
Loading...
Need help?
General
