Transducers Kit
Introduction and Description Chapter 1
3
1 – Conductance probe with flying
leads.
– – Two parallel rods in circular
supports.
1 TK2941H Heat Transducers Kit comprising:
1 – Heat bar with line connector,
on-off switch, voltage selector,
main and auxiliary heaters.
1 – Calibration tank with lid and
spring clip for mounting on heat
bar
1 – Transducer mount with spring clip
for mounting on heat bar
1 – Thermal reed relay with spring
clip for mounting on heat bar
1 – Bi-metal thermostat with spring
clip for mounting on heat bar
1 – Transducer – thermocouple and
flying compensating leads.
Brown sheath.
1 – Transducer – thermistor with
flying leads. White sleeve.
1 – Transducer – platinum resistance
with flying leads. Yellow sleeve.
1 – Thermometer.
1 TK2941L Light Transducers Kit comprising
1 – Lamp holder to mount on Electro-
mechanical transducers test rig
(TK294)
1 – Lamp 14.4V 0.1A
1 TK294 Light Transducer Box complete
with:
Optical detector assembly with
photo-transistor, photodiode,
photoresistor, infra-red filter
and optical filter mounts.
1 – Pack of nine optical filters.
To Next Page
Loading...
Need help?
General