Transducers Kit
Introduction and Description Chapter 1
7
Light Transducers
Kit The Light Transducers Kit TK2941L comprises an optical
detector assembly, four photo-electric devices and a selection
of optical filters. The assembly is fitted to the test rig from the
Measurements Package together with a light source. The filters
may be fitted to the assembly as required.
SPECIFICATION
Lamp Holder To mount on Test Rig.
MBC lamp in holder on small plate with
flying leads - 14.4V 0.1A
Optical Detector
Assembly
Black box with rotating turret labelled
“LIGHT TRANSDUCER BOX”
Photo-transistor
Photo-diode
Photo-resistor
Optical Filters 2” x 2” slide mounts labelled with
wavelengths.
Wavelength of transmission 440, 470, 490,
520, 550, 580, 600, 690 and 700nM.
To Next Page
Loading...
Need help?
General