CUTTING CAPACITIES
Material Maximum cutting diameter
Galvanized steel cables, textile core 7mm (0.28in)
Galvanized steel cables, steel core 6mm (0.24in)
Hard steel cables, resistance 160 kg/mm2 5mm (0.2in)
Non-oxidable steel cables, resistance 190 kg/mm2 4mm (0.16in)
Extra tough cables and strands, resistance 210 kg/mm2 3mm (0.12in)
Electric cables (copper or aluminium) with steel core) 7mm (0.28in)
Aluminum- or copper rods 5mm (0.2in)
Iron rods, resistance 60 kg/mm2 4mm (0.16in)
Tempered spring wire 2.5mm (0.1in)
Welded wire mesh
Rubber conveyor belt
THE POINTS OF EXCELLENCE
High-strength blades
Hardened and tempered blades for cutting the strongest of cables.
Triangular cutting action
FELCO's innovative triangular cut allows you to progressively cut cable wires and at the same
time avoid squashing of strands. Thanks to this feature, it is generally not necessary to tie the
cable before the cut.
FELCO C7 - Product detailed data sheet - Page 3
To Next Page
Loading...