Felisatti T770 User Manual

TRONCATRICE
GB
MITRE SAW
D
GEHRUNGSSÄGE
F
SCIE CIRCULAIRE
E
INGLETADORA
NL
VERSTEKZAAG
GR
ÄÉÓKÏ∆PÉÏÍÏ ÖÁËÔÓÏKÏ∆ÔÇÓ
P
SERRA CIRCULAR
S
GERINGSÅG
DK
RYGSAW
N
GJÆRSAG
SF
VINOKULMASAHA
T770 - T771 - T777 - T777CE
T778 - T778CE
ISTRUZIONI PER L'USO • INSTRUCTIONS FOR USE • BETRIEBSANLEITUNG
INSTRUCTIONS DE SERVICE • INSTRUCCIONES PARA EL USO • GEBRUIKSAANWIJZING
ÏÄÇÃÉÅÓ ∞PÇÓÇÓ • INSTRUÇÕES DE USO • BRUKSANVISNING
BRUGSANVISNG • BRUKERVEILEDNING • KÄYTTÖOHJEET
07/06
cod. 6537596315
9
ATTENZIONE: l’istruzione è stata
tutta sistemata (proveniva
da Page Maker) ma sono
state fatte le pellicole solo
delle prime 2 pagine di ogni
lingua+copertina+retro
copertina.
In caso di pellicole di tutto il
libretto bisogna controllare
ogni pagina (tabelle; box
attenzione; ecc.).

Felisatti T770 Specifications

General

Brand	Felisatti
Model	T770
Category	Saw
Language	English

Summary

Technical Characteristics

Technical Data

Details specifications like tension, power, speed, dimensions, and sound levels for different models.

Safety Devices

Explains the protective casings and safety hook mechanism for operator safety.

General Safety Standards

Installation

Electrical Connection

Explains how to safely connect the machine to the power supply.

Mitre Saw Adjustment and Squaring

Blade Unit Lifting

Blade Penetration Adjustment

Splitter Wedge Regulation

Turntable Adjustment

Blade Unit Regulation to Working Surface

Operation and Use

Vertical Plane Limit Stop Adjustment

Cutting Speed

Provides guidance on choosing the right blade and speed for different materials.

Cutting at 90° with Rotated Turntable

Explains how to perform cuts at 90° with the turntable set to an angle.

Angled Blade Cut with 0° Turntable

Describes how to perform cuts with the blade angled and turntable at 0°.

Using the Mitre Saw

Provides general instructions for operating the mitre saw safely.

Blade Start and Stop

Explains how to start, stop, and lock the blade operation.

Using the Clamp

Using End-Stroke Shafts

Clamp 6969000000

Clamp 6976000000

Using the Upper Surface

End-Stroke Guide for Upper Surface

Use of T777 CE and T778 CE Mitre Saws

Highlights the electronic module and its benefits for specific models.

Using the Electronic Module

Explains how the electronic module improves safety and performance.

Cutting Wood

Cutting Aluminum Sections

Cutting Steel Sections and Bars

Improper Use

Maintenance

Routine Cleaning

Problems, Causes, and Remedies

Part Replacement

Replacing the Blade

Step-by-step guide on how to safely replace the saw blade.

Brush Replacement

Instructions on how to replace the motor brushes.