Need help?Do you have a question about the Felix printers Tec 4 and is the answer not in the manual?
General| Heated Bed | Yes |
|---|---|
| Bed Temperature | Up to 100 °C |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Print Speed | Up to 100 mm/s |
| Materials | PLA, ABS, PETG |
| Connectivity | USB |
| Number of printheads | 1 |
| Frame | Aluminum |
| Input Power | 350W |
To Next Page
