EasyManua.ls Logo

Femometer B002WL-T - Operating Instructions; Fast Warming Mode

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FAST: Fast warming/Defrost with timer selection of 0.5-10 minutes.
Automatically turn to stand by mode when fast warming mode
completed.
*Reference time table is shown below.
EN
OPERATING INSTRUCTIONS
1.Place the bottle or container in the bottle warmer. (Fig.1)
2.Fill the bottle warmer with 80ml distilled water. (Fig.2)
24H: Select this mode when you would like to warm a bottle of
milk/water (or warm a container/jar of baby food) with a
temperature range of 98-176.
STEAM: Select this mode when you would like to steam sterilizing
a milk bottle/food container/jar. This function will last for 10
minutes.
NOTE:
1.Due to the high variety of baby food consistencies, it is strongly
recommended to continuously stir and check while you are defrosting
the baby food for an optimal result.
2.Note: The milk/food should not be eaten directly after thawing.
3.Select FAST, the indicator light above will lit. (Fig.3)
At this setting, you are able to defrost/heat up your frozen/refrigerated
milk/baby food to liquid/warmed state with an adjustable timer range 0.5-10
minutes.
(Warming time depends on milk volume/starting temperature/bottle material)
FAST WARMING
04