TILTED FORWARD TILTED BACKWARD
CORRECT INCORRECT
OWNER’S MANUAL
To FOLD helmet, lift arrow on lock tab ( ) up AND rotate side inward, as
shown in Figure B. Repeat on opposite side.
FIT GUIDE
To ensure the helmet will provide the maximum protection, make sure it fits
correctly and is worn properly. Once helmet is fully open, place onto head with
rear fit adjuster in the back. Make sure the helmet is low and straight in the front
to protect your forehead, as shown in Figure C. Never wear the helmet tilted
forward or backward. Note all adjustments must be made when the helmet is
perfectly horizontal across the forehead. Failure to do so may result in an
improper fit with risk of the helmet not being secured properly and may come off
in an accident.
LIFT
B
FOLD
C
3
To Next Page
Loading...