FEND Super + Lights - Helmet Buckle and Strap Adjustment; Rear Fit Adjuster and Fit Check

4
D E
Rear Fit Adjuster: Rotate rear dial t adjuster clockwise to tighten and counterclockwise
to loosen (see Figure F). Note the t should be adjusted for your comfort and should not
be uncomfortably tight.
Fit Check: Once all adjustments are made, it is very important to check the t.
Stand in front of a mirror and grab the helmet with both hands. Twist left and right.
Your forehead skin should move along with the helmet. If it can be rolled off the
head completely in either direction, it does not t properly and needs readjustment.
WARNING: If you cannot adjust the helmet to t properly, it must not be used. Please
consult with your dealer or contact FEND for further assistance.
Buckle: Fasten buckle securely under chin (see Figure D). Pull strap tight for a
customized t. Make sure straps do not cover the ears (see Figure E). Check all
adjustments each time before use.
F
ROTATE