Fender Custom Vibrolux Reverb - CUSTOM VIBROLUX REVERB SPECIFICATIONS

A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.,
CORONA, CA 91720
“CUSTOM” VIBROLUX REVERB SPECIFICATIONS
PART NUMBER: 120V 021-5100-000
100V 021-5170-000
230V 021-5160-000
230V UK 021-5140-000
230V NORDIC 021-5180-000
240V AUSTRALIA 021-5130-000
DIMENSIONS: Height: 19-3/8” (49.2 cm).
Width: 25” (63.5 cm).
Depth: 8-5/8” (21.9 cm).
WEIGHT: 46lbs (21kg).
POWER OUTPUT: 40W R.M.S. minimum into 4Ω.
OUTPUT IMPEDANCE: 4Ω.
INPUT IMPEDANCE: Input 1, both channels: 1 MΩ.
Input 2, both channels: 136 kΩ.
FEATURES: Tube generated power amp, Vibrato in both channels, Reverb in both channels,
tilt-back legs.
POWER REQUIREMENTS: 100VAC - 50/60 Hz, 270W.
120VAC - 60 Hz, 270W.
230VAC - 50 Hz, 270W.
240VAC - 50 Hz, 270W.
SPEAKER COMPLEMENT: (2) 10” Eminence, replica of Jenson P-10.
SOUND: Legendary.
WARNINGS: NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
THIS EQUIPMENT MUST BE EARTH GROUNDED.