Fender Cyber-Twin - MIDI and Headphone Connections

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
! "!#
17

MIDI IN
- Input MIDI jack for connection to the output of a MIDI
device.
 MIDI OUT - Output MIDI jack for connection to the input of a MIDI
device.
 MIDI THRU - Any MIDI signal received at the MIDI IN jack is immedi-
ately sent out the THRU jack.
 SPDIF OUTPUT - Output jack for connection to equipment such as a
digital recorder.
[
[[
[
S/PDIF =Sony/Phillips
Digital Interface Format
Uses a standard RCA jack. This output is a digital stereo source not
compatible with equipment normally associated with RCA jacks.
 HEADPHONES - Output jack for connection to headphones using a
standard 1/4” stereo phone plug. Output to the speakers is automati 
cally muted when this jack is in use. Line out signals are not muted.
 STEREO / MONO - While this switch is IN, right and left line outputs
(MM) are mixed together for dual MONO output from the impedance
balanced, XLR jacks.
 RIGHT and LEFT XLR LINES OUT - Impedance balanced jacks for
stereo or dual mono output to sound reinforcement and recording
equipment. Output signals are frequency compensated to simulate a
miked speaker.
 EFFECTS LEVEL - Push this switch IN for -10dBv (footpedal FX
compatible), Switch OUT for +4dBu, (rack mount FX compatible).
 RIGHT and LEFT / MONO RETURN - Impedance balanced input
jacks for connection to the output of either a stereo or mono FX
device. These jacks will accept input from either balanced or unbal-
anced sources.
 MONO SEND - Impedance balanced output jack (post-distortion
send) for connection to the input of an FX device.
igital