Need help?Do you have a question about the Fender FM212R and is the answer not in the manual?
General| Type | Solid State |
|---|---|
| Power | 100 Watts |
| Speakers | 2 x 12" Fender Special Design |
| Channels | 2 (Normal and Drive) |
| Effects | Reverb |
| Controls | Volume, Treble, Bass, Reverb |
| Inputs | 2 x 1/4" |
| Outputs | 1 x 1/4" |
| Weight | 45 lbs (20.4 kg) |
| Dimensions | 19.5" (49.5 cm) |
| Footswitch | Optional (for channel switching) |
Handles external audio inputs and master volume adjustment.
Controls for muting the signal and selecting amplifier channels/modes.
Circuitry for Bass, Middle, and Treble frequency controls.
Amplification stages and circuits for drive/overdrive effects.
Transformer, fuses, and AC power input terminals.
Circuits for producing regulated positive and negative DC supply voltages.
Final transistor stages for amplifying the audio signal.
Connectors for external speaker or line output.
Log of changes made to the service diagram.
Important component notes, ratings, and general schematic guidelines.
