Fender Mustang GT40 - Editing and Saving Presets

The CONTROLS LAYER of each preset displays information on whatever amp or eect is highlighted in the
SIGNAL PATH LAYER. Amp control knob settings are displayed by default (see illustration below); eects con-
trol settings are displayed when an eect is highlighted in the SIGNAL PATH LAYER. Amp and eects controls
are selected by turning the ENCODER.
Each preset can be used as is. With many dierent amp models, eects types and control settings to choose
among, however, each preset’s SIGNAL PATH LAYER and CONTROLS LAYER settings can easily be modied
and saved for personally individualized sounds (see next section, “Editing and Saving Presets”).
ROCK & ROLL
TWIN
REVERB
REVERBFUZZ
AMPLIFIER
Close-up detail of the CONTROLS LAYER, in which the gain control for
the amp model within the preset is selected.
EDITING AND SAVING PRESETS
Within each preset, the amplier control knob settings, amp models, and eects types and parameters can
be tailored to individual preference. When a preset is selected, the box containing its number is blue, indicat-
ing that no edits have been made to it (see illustration below).
When edits to a preset have been made, the box containing the preset number changes to red, and the SAVE
utility button illuminates (see illustration below).
TWIN
REVERB
REVERBFUZZ
ROCK & ROLL
TWIN
REVERB
REVERBFUZZ
ROCK & ROLL
SAVE
5