Fender Mustang GTX Series - Bypassing Effects; Global Effects Bypass; Bypassing Individual Effects

There are two ways to bypass eects. The rst is a general on-o feature that simply turns o all eects in all
presets with a single press of a button. The second lets users bypass specic individual eects within a preset.
To turn o all Mustang GTX eects in every preset (and turn them back on), press the X FX utility button.
There is no option to save; this is merely a quick way to turn all eects o and back on. When the X FX utility
button is pressed it will illuminate, and a blue “bypass” label will appear above each eect (see illustration
below). If specic individual eects have already been bypassed in a preset, use of the X FX utility button will
not turn them back on.
To bypass specic individual eects within a preset, highlight it in the SIGNAL PATH LAYER and press the
ENCODER. Select “BYPASS” from the menu of eects placement options and press the ENCODER again. The
SIGNAL PATH LAYER will then indicate that the eect has been bypassed; the box containing the preset num-
ber will change from blue to red (indicating that a preset edit has been made), and the SAVE utility button
will illuminate. With the eect now bypassed, further edits can then be made or the SAVE utility button can
be pressed to keep completed edits (see illustrations below).
ROCK & ROLL
TWIN
REVERB
REVERB FUZZ
POST FX 1
LEVEL DECAY
DWELL DIFF TONE
To bypass a highlighted eect, rst press the ENCODER to access the menu of eects placement options.
BYPASSING AN EFFECT
13
ADD FX
BYPASS
DELETE
MOVE
REPLACE
Turn ENCODER to highlight “BYPASS” in eects placement options menu, then press the ENCODER to select it.
ROCK & ROLL
TWIN
REVERB
REVERB FUZZ
BYPASS
SAVE
With the eect bypassed (as indicated here by white arrow below it and blue box containing the label “BYPASS”
above it), continue editing other parameters or press the illuminated SAVE utility button to keep completed edits.
TWIN
REVERB
REVERBFUZZ
ROCK & ROLL
BYPASSBYPASS
FX
The “X FX” utility button illuminates when pressed, bypassing all eects in all
presets (as indicated by blue “BYPASS” labels above each eect).