The selected preset is now added to SETLIST 1; repeat the previous two steps to add additional presets to
SETLIST 1. Once multiple presets have been added to SETLIST 1, use the ENCODER to scroll through and acti-
vate dierent presets within the selected Setlist:
When nished creating and using a Setlist, return to main preset mode by pressing the top LAYER BUTTON.
Note that when doing this, the PRESET LAYER will display whichever preset was last highlighted in the Setlist:
To clear all presets from a Setlist, use the ENCODER to scroll to the Setlist to be cleared, then press the CON-
TROLS LAYER button corresponding with the “gear” icon:
“CLEAR SETLIST” will appear in a blue box; press the ENCODER on it to clear all the presets in that Setlist. Al-
ternately, press the top LAYER button corresponding to “back” in the DISPLAY WINDOW to not clear a Setlist:
To delete a single preset within a Setlist, highlight the preset to be deleted by scrolling to it using the EN-
CODER; press the CONTROLS LAYER button corresponding with the “gear” icon in the DISPLAY WINDOW:
33 - PRESET
88 - PRESET
1 - PRESET
25 - PRESET
50 - PRESET
MENU
33 - PRESET
88 - PRESET
1 - PRESET
25 - PRESET
50 - PRESET
MENU
30
CLEAR SETLIST
MENU
back
To Next Page
Loading...
