Fender Mustang GTX Series - Page 36

34
MENU
ENTER PASSWORD:
*******
back
After selecting “CONNECT,” enter a password by turning and pressing the ENCODER to add each character.
When password is complete, press the PRESET LAYER button (corresponding with onscreen prompt “done”).
MENU
ENTER PASSWORD:
A B C D E F G
done
When WiFi is turned on in Mustang GTX, there are other network menu options in addition to “CONNECT.”
These are labeled “FORGET,” “MODIFY” and “INFO” (see illustration below). Use the ENCODER to scroll through
and select one of these options, which are described below.
FORGET: For disconnecting a network and removing it from the amp’s memory. To re-establish a connection
with a “forgotten” network, follow the steps for “ADD HIDDEN NETWORK” (pages 32-33).
MODIFY: For modications to the current network’s displayed “SSID,” “PROTOCOL” and “PASSWORD” param-
ters. Use the ENCODER to scroll to and select one of these parameters, then turn and press the ENCODER to
enter individual characters until modications are complete.
INFO: Displays the current network’s name (SSID), signal description, protocol, and connection status. This
information can not be modied by the user.
MENU
CONNECT
FORGET
INFO
MODIFY
back
Close-up detail of DISPLAY WINDOW showing additional WiFi network options “FORGET,” “MODIFY” and “INFO”.
MENU
WIFI ON
NETWORK 3
NETWORK 2
NETWORK 1
back
A green dot to the left of the network name indicates successful network connection.