Fender Mustang GTX Series - EQ & Amp Settings Menu; Global EQ Profiles; Line Out and USB Gain Control

EQ & AMP SETTINGS
“EQ & Amp Settings” is a MENU utility (see page 28) providing access to several functions, including GLOBAL
EQ, LINE OUT/USB GAIN, PRESET ORGANIZER, RESTORE SETTINGS and RESTORE ALL, and ABOUT THIS AMP. All
are initially accessed by rst pressing the MENU utility button and using the ENCODER to scroll to and select
“EQ & AMP SETTINGS.”
GLOBAL EQ
“Global EQ” is a MENU utility button function within the EQ & AMP SETTINGS menu (see page 28) that provides
access to dierent equalization curves for easier adjustment of overall amp response to dierent acoustic
environments. This is particularly helpful when users have all their favorite presets and settings dialed in, but
then nd themselves in, for example, brighter- or boomier-sounding rooms, halls, outdoor areas, etc. Rather
than re-adjust each and every preset and setting, users can quickly and easily select one of nine dierent EQ
proles shaped to suit the surroundings at hand.
Activate this function by pressing the MENU utility button (green arrow) and using the ENCODER to scroll to
and select “EQ & AMP SETTINGS”, and then “GLOBAL EQ.” Scroll to and select any of the nine options presented
(see illustrations below and on next page)—“BRIGHT CUT EQ” for de-accentuating top end, ”FLAT EQ” (a good
default choice that actually provides no additional equalization), two dierent “GUITAR FOCUS” proles, two
dierent “BRIGHT BOOST” proles for accentuating the top end, two “LOW CUT” proles for trimming bass
response, and a “LOW VOLUME BASS BOOST” prole for enhanced bass response at lower volume settings
(using this EQ at higher volumes could cause unwanted boominess or speaker distortion).
49
MENU
SETLIST
WIFI & BLUETOOTH
CLOUD PRESETS
FOOTSWITCH
EQ & AMP SETTINGS
TUNER
To access the Amp Settings function, rst press the MENU utility button.
Use the ENCODER to scroll to and select “EQ & AMP SETTINGS.”
MENU
WIFI & BLUETOOTH
CLOUD PRESETS
FOOTSWITCH
TUNER
EQ & AMP SETTINGS
SETLIST
MENU
WIFI & BLUETOOTH
CLOUD PRESETS
FOOTSWITCH
TUNER
EQ & AMP SETTINGS
SETLIST
To access the Global EQ function, rst press the MENU utility button and use the
ENCODER to scroll to and select “EQ & Amp Settings”.