Fender Mustang GTX Series - Fender Tone App Features; Fender Tone App Capabilities

FIRMWARE UPDATES AND FACTORY RESTORE
As noted in the introduction, Mustang GTX users should check regularly for rmware updates that improve
and enhance the Mustang GTX experience. To perform a Mustang GTX rmware update, put the amp in WiFi
update mode by pressing and holding the ENCODER for ve seconds (yellow arrow in illustration below) while
turning the amplier on.
The DISPLAY WINDOW will then indicate that Mustang GTX is searching for the latest rmware update, fol-
lowed by indication that the rmware update is downloading (see illustrations below).
When the download is complete, the DISPLAY WINDOW will then indicate that Mustang GTX is applying the
rmware update, followed by indication that the rmware update is complete and the amp should be restart-
ed (see illustrations below).
60
SEARCHING FOR UPDATES...
DOWNLOADING UPDATES...
APPLYING UPDATES...
AMPLIFIER UPDATE COMPLETE
PLEASE RESTART YOUR AMP