TELEPATH™ WIRELESS SYSTEM
1
FEATURES
The Telepath Wireless System delivers full-frequency wireless audio from your guitar or bass over a range of up to 70 feet. The
system uses the 5.8GHz frequency band, providing clear signal and reducing interference by avoiding the crowded 2.4GHz
bandwidth used by most wireless devices.
The ultra-exible plug design lets the unit accommodate a wide range of input jack positions, and the built-in cable tone simula-
tion circuit and passive/active switch ensure authentic tone for any type of instrument. Simple controls and auto pairing technol-
ogy let the transmitter (black unit) and receiver (blue unit) automatically pair on power up and start passing signal in seconds.
Jack plug swivels 270
º
A. JACK PLUG: Plug swivels 270
º
; plug heels have raised
tactile icons (F).
B. LED INDICATOR: Indicates battery charge level (upper
table on next page) and connection/pairing status on both
transmitter and receiver (lower table on next page).
C. POWER/SYNC BUTTON: Multi-function on/o and
manual syncing button on both transmitter and receiver.
Press and hold for two seconds to power unit on and
o (powering o either unit can act as a mute when
changing instruments). Press and hold for ve seconds
to initiate manual syncing.
D. USB-C PORT: For charging transmitter and receiver; use
included dual USB-C cable.
E. ACTIVE/PASSIVE SWITCH (TRANSMITTER ONLY): Set
to ACTIVE when using instruments with high signal
levels, such as those with onboard preamps.
F. TACTILE ICONS: Raised icons on jack plug heels for
quickly identifying transmitter and receiver in low light/
darkness:
1. Plug receiver (blue unit) into amplier
input jack (near right).
2. Plug transmitter (black unit) into
instrument output jack (far right).
3. Power on both units; ensure that both
LED indicators turn green.
STARTUP
RECEIVER
TRANSMITTER
To Next Page
Loading...