Need help?Do you have a question about the Fender Yngwie Malmsteen Stratocaster and is the answer not in the manual?
General| Body Material | Alder |
|---|---|
| Body Shape | Stratocaster |
| Neck Material | Maple |
| Scale Length | 25.5 inches |
| Number of Frets | 21 |
| Pickup Configuration | SSS |
| Nut Width | 1.650 inches |
| Hardware | Chrome |
| Bridge | Vintage Style Synchronized Tremolo |
| Fretboard Radius | 9.5 inches |
| Tuners | Fender Vintage Style |
| Pickup Switching | 5-Position Blade |
| Fingerboard Material | Scalloped Rosewood or Maple |
Neck options for the '98 Malmsteen Stratocaster, R/W and M/N.
Tuning key set and associated mounting screws.
Brass nut component for the guitar.
String retainer, mounting screws, and spacers.
Truss rod adjustment nut and adjusting wrench.
Body for the '98 Malmsteen Stratocaster, solid paint.
Neck mounting plate and its associated mounting screws.
Strap button and mounting screws.
Pickguard for the '98 Malmsteen Stratocaster and mounting screws.
Dimarzio YJM pickup with a mint green cover.
Dimarzio HS-3 pickup, mounting screws, and latex tubing.
Control potentiometers, 250k taper and split variants.
Mounting hex nuts and lock washers for controls.
Volume/tone knobs (aged white) and a 3-position switch.
Capacitor (.022uf) and solder lug.
Output jack, mounting hex nut, and lock washer.
Jack ferrule and associated mounting screw.
Vintage Strat bridge assembly, mounting screws, and bridge block.
Tremolo claw, mounting screws, and spring.
Tremolo arm and knob.
Bridge plate and bridge section (6).
Intonation screws (6) and intonation springs (5&6, 1-4).
Height adjustment screws (1&6, 2-5) and adjusting wrench.
Spring for the tremolo arm.
Back plate and its associated mounting screw.
Body part numbers corresponding to color options: Candy Apple Red, Vintage White, Sonsic Blue.
