FENDT 916 Vario - Page 81

81
OPERATION
Changing the activation speed of the
stabilising system
Operation_Pic_number:1
● Press key (F5). The following sub-menu ap-
pears.
Operation_Pic_number:1
● With rotary switch (P2), set indicator (A) to the
desired switch-on speed
Setting range 0 - 30 km/h.
Fig.170
Fig.171
18.5 Electronic slip control
Text-module
(optional).
Operation_Pic_number:1
● Turn electronic slip control on and off with the
key (F2).
When the slip control is inactive, symbol (A) is
shown.
Setting slip control sensitivity
Operation_Pic_number:1
● Set the implement to the desired type of con-
trol (position / traction mix control).
● Press key (F3). The following submenu appe-
ars.
CAUTION:
The tractor is equipped with a radar
sensor. Do not look directly into the
radar sensor. Microwave radiation!
Fig.172
Fig.173