126
OPERATION
30. Variotronic Ti
The TeachIn function enables repetitive operational sequences to be saved and retrieved when nee-
ded.
An individual set of functions and relative factors can be selected (e.g. an engagement/disengagement
point can be selected for the rear PTO according to distance, time, lift height, or can be selected ma-
nually by pressing a button).
Text-module
NOTE:
On the driver seat is a start-off protection. If the driver's seat is unoccupied for more than 3 se-
conds, the pull-away cut-out is activated. Variotronic Ti functions cannot be played back.
If a function or a trigger is required during recording, which is not already in the configuration
list, adapt the configuration list (see OPERATION Section 30.9).
30.1 Functions
Text-module
Rear power lift
(Raise, Control, Stop, Fast feed-in).
Front power lift
(Raise, Control, Stop, Floating
position).
Rear PTO
(ON - OFF).
Front PTO
(ON - OFF).
Electric hydraulic valves
(Raise, Lower, Stop, Floating
position).
Vario transmission
Cruise control (ON - OFF).
4-WD
Automatic mode, 100%, OFF.
Differential locks
Automatic mode, 100%, OFF.
Electronic engine control
(ON-OFF, calling up stored engine
speeds).
30.2 Triggers
Text-module
NOTE:
'RED' light = function active.
'GREY' light = function not active.
Distance
(travelled).
Time
(elapsed).
Manual
(by pressing the button).
Lift height of rear power lift.
Lift height of front power lift.
To Next Page
Loading...
