EasyManua.ls Logo

FENDT 920 Vario - Page 129

FENDT 920 Vario
267 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
129
OPERATION
30.4 Operating
NOTE:
If travelling at more than 25 km/h, playback
(Play) is not possible.
Recording of an operational sequence bet-
ween two activations is limited to 120 se-
conds and/or 300 metres.
If recording is interrupted for longer than
2 minutes, recording is discarded.
The direction of travel selected for the recor-
ding must correspond with the direction of
travel selected when playing back. Travelling
forward and being stopped are considered
the same.
If the playback of a recording is required in
the other direction of travel. Record with
(Edit), see OPERATION Section 30.8, start,
drive in other direction, new direction of tra-
vel is saved.
Text-module
Operation_Pic_number:1
Press key (F5). The following sub-menu ap-
pears.
Operation_Pic_number:1
Press key (F4). The following sub-menu ap-
pears.
Fig.313
Fig.314
Record menu level
Operation_Pic_number:1
or
Play menu level
Operation_Pic_number:1
Text-module
To record operational sequence.
Up to 13 functions can be put together to form an
operational sequence.
In the next example:
Automatic function power lift and PTO.
The rear power lift is lowered, the rear PTO is
engaged at a selected lift height of the rear
power lift. The rear power lift is lifted, the PTO is
disengaged at a selected lifting height of the rear
power lift.
Press key (F2)
Change to menu level Record.
Fig.315
Fig.316

Table of Contents

Related product manuals